Seeing as I couldn't restore to a point before the update took place, the best I could do was uninstall the update afterward. However, now I am stuck with "windows copy is not genuine" crap. Is there anyway to revert it to the same as before?
If removing the update does not resolve the issue, back up your data on a separate drive format and reinstall windows. I always install ALL programs onto a separate drive, if you have Hiren's utility disk, you can partition and use a restoration utility. This way you'll have the windows install without the update that you will return to. Pretty easy to do. Here is a video with links to install Hiren's utilities. Best of luck, and good wishes!
Windows 7 Loader V1.9.9 By DAZ 64 Bit
I did buy my MS windows 7, but it seems that as of today i cant run any of my pirated software, this includes all of adobe cs4, 3ds max, and autodesk maya. Does this update affect those things too? Or just pirated windows 7 copies? help would be MUCH appreciated as i use those programs for school.
If antipiracy update kb971033 is on, and it reports copy as non-genuine try using activation crack by someone called daz program windows 7 loader v 2.0.8 via any torrent site making sure its exe form once downloaded. Make sure antivirus dont throw wobbly, by disabling it run program buy opening folder created and click on little ball with windows 7 loader. When loaded click install, if error throws up ignore restart click install again if it says it has installed and asks to either close shutdown or restart click restart wait till windows 7 ultimate has loaded and if antipiracy update kb971033 is installed go to internet explorer type www.microsoft/genuine/validate then hit return key wait for it to go to site and if it give option of install kb971033 if allready installed and loaded click continue and if box on bottom of screen comes up options for this site click allow for all click return then should go to validation process.
If activation crack windows 7 loader buy daz v 2.0.8 or higher has worked windows should validate genuine after that you should be done save to favorites if you want and reload same save site 2 or 3 times just to make sure windows has validated genuine if same answer happens 2 or 3 times in a row saying copy passed validation then your done ok.
back up all of ur files and programs to an external harddrive and re-install windows 7 this time when installed for update make sure u select the option where it asks u to download and install instead of automatic..... i did this and installed all but the update above and its problem solved for me guys!
can't you just save your files on a different hard drive on your pc rather than OS. then re-install windows seven and avoid this specific update. I have multiple partitions on my hard drive so can't i just save everything to the other ones that do not have the OS installed on it.
dear sir all the things here in your site its still not working for my windows 7 ultimate. every thing i boot up the pc i keeps on popping the prompt your windows is not genuine. what shall i do?it is very hard for me to do this things, what shall possible solutions are there? or how can i remove this popping prompts every time i boot the pc. thanks and more power Gobless po
I only heard recently about this update which I have already installed on my pc. However I haven't got any problems yet concerning the authenticity of my windows 7 ultimate x64. Do you think I can just uninstall it before I get any? Will it work?
For those of you that are running pirated Windows 7 and are being plagued with pop-ups from Microsoft repeatedly reminding you of the fact. Download and run WAT remover 2.2.5. This is freeware by Hazar. This will remove the Build 7600 This is not ....etc' crap from your home screen and prevent the pop-ups that spoil streaming TV. You will still need to untick KB971033 every time before you shut down or alternatively turn off windows updates completely.
This particular update does not take no for an answer. If like me you have 'Windows update' set to advise before installing and if you then un-tick the update box windows will acknowledge your instruction and then proceed to install it anyway!I have now set my windows updates to 'advise before downloading' so that I can cut it off at the canyon!You can easily uninstall KB971033 so no great problem but it's the obstinacy of Microsoft and their principle that they must be the final arbitrator of what must be installed that irritates.
that's the same thing that happened to me :-/ I had my win updater service completely stopped but then an alarm clock program I wanted to install said I needed a framework update before it would install/work so I turn on my update service selected 3 of the many updates that were available and the next thing I know I have the build 7061 error. When I checked my installed updates in the control panel there were like 15-20 of them instead of 3-4. It's really annoying cuz now I've spent hrs tryin to remove invalid op crap with no luck so far but the 1 cool thing I found was that u can go to the WAT update in win update and hind it using the right click on ur mouse so u won't have to worry about it ever installing again.....I've been thinking since I might have to redo my operating system anyway I might try out Windows 8 and c how I like it....any thoughts on that? Has any1 here tried Win8? I did hear from 1 person it was annoying and far worse than 7 but I like to hear more than 1 opinion not that it would stop me from testing it out anyway lol So Btw i uninstalled the WAT update and ran win loader but cant seem to fix my op sys...is it possible I cant fix it cuz I used a different crack program during original install? And if that is the case how do I go about uninstalling it? I think it may have been WAT Remover if that helps....
Just activated mine and the loader doesn't even touch the WAT...still activated and fully updated. This was not a free tool and for those who want it can contact me at deathshead1022@yahoo.com for purchasing details.
can someone please post what update adds red bars to microsoft office 2010 when you don't want to waste time calling in every time you do a recovery & have to re-install it, it gets frustrating for ppl who actually bought the software. It just says "microsoft activation failed" Note though that it was already activated & working fine until some update installed from windows update.
First sign something was wrong was when Windows refused to work any more (no warnings, no errors, no problems detected) in normal mode. Only in Safe mode would it boot up. System Restore failed to work consistently, and loading up windows in normal mode only resulted in a black screen or windows loading and then semi-freezing when I clicked on anything until I was told that "Microsoft had an error".
Went online on my mothers computer and found out about this update. Went to uninstall all updates in case they were causing problems. Uninstalling the one above is the only one that would not allow. The left click on it refused to work and uninstalling the others only resulted in my computer telling me "Updating windows please do not close your computer" and semi-freezing there (mouse worked fine, little dots by the do not close computer moving happily, no sound or sign ofactivity from the actual laptop), for both normal mode -and- safe mode.
I have a PC of LENOVO and a PIRATED version of Windows 7,when switch on my PC it always Shows UPDATES.... i dont know how to get rid off it and when i click on it it starts updating and my windows get cracked....if u know how to get rid off this then please help me!!!
BUT... It also has a sneaky update option in the security centre, especially if you don't have any AV or IS software installed. It will complain that the default windoze firewall should be in operation... there is a check box to confirm that you will allow the security Center to "check for windows updates" at the same time as checking for security updates.
Avoid all windows updates in the first place. Then you will never have a problem. The updates are now needed at all in your lifetime - trust me. As long as you system is working fine, why do you need to get logged on to a Microsoft server.Once you're there, your dead. Further than this if your so concerned about the software you use and the messages that pop up, by the original and stop cribbing. One good investment solves all the problems you might face in the long run, unless your planning on countless installations and formats and so on.
My sistuation: i have wondows 7 ultimate, that was genuine, and the readme file said it would stay genuine. But obviously it didn't, so i went to a trustable torrent site and downloaded "DAZ loader", wich from my faint memory worked great.
Anyways, i ususally just use genereal settings, dont bother messing with it, but since i also have linux mint 15 installed on another partition, i saw in the options of DAZ loader, that i could tick off something like "leave boot as is" or something like that.
Now it wont start at all, i can enter bios, i can run different hardisk and meory tests, wich all get passed, but i cant seem to boot from my windows or my linux.........exactly what i wanted when i ticked that "option" right!
As it seems that u have dual boot system on 2 partitions (Windows & Linux or whatever both), you should have a separate boot disk created by the Linux. After installing DAZ Loader, it seems to have been corrupted thats why you are uanable to boot either of the systems. try to repair ur boot sector by googling "repairing dual boot windows" especially in Linux Forums.
Restarted the computer and now i cant boot either windows nor linux( wich i also have installed obviously), i all i seee when i start the computer is a blinking "_" without the " ofcourse...i can enter bios, i can run memory teststs and hard disk tests and everything loooks fine....but i dont have the choice of choosing linux....and windows doesnt start.......hmmmm ANYBODY outhere who experienced this? 2ff7e9595c
Comments